Features

PWT Four Line Mixing Manifold

• Manifold containing eight (8) electronically activated solenoids used to supply hot, cold and mixed water to four (4) lavatory fixtures.

Plumbing Specifications

• 1/2 Inch Pipe Copper Solder Unions at water inlets
• Soft Nose Union between solenoids
• Includes four fitting kits each containing the following:
• Two 3/8 NPT to 3/8 Tube
• One 0.5 gpm Flow Orifice
• One 3/8 NPT to 3/8 NPT Coupling
• 40 feet 3/8 OD Nylon Tubing
• Solenoid Specifications
• 24 VAC – 50/60 Hz Operating Voltage
• Current: In Rush 12 VA (500mA); Holding 4.63 VA (193 mA)
• Power Consumption: 7 Watts
• 160 Fahrenheit Maximum water temperature
• Brass body with integral ‘Y’ strainer (80 Mesh)
• Stainless Steel Valve Seat
• Includes 15’ cable w/ 6 position, 4 pin RJ-11 connector to connect to Sloan PWT MCR-Series Controller

Accessories

• Solenoid cable length can be increased to a maximum overall length of 200 feet with additional PWT extension cord kits
• ETF-1003-36 3’ single wire extension cord kit
• ETF-1003-108 9’ single wire extension cord kit
• ETF-1003-240 20’ Single wire extension cord kit
• ETF-1003-600 50’ single wire extension cord kit