The Sloan MCR-101-A Single-Line Mixing Manifold is used with the Sloan PWT System to manage water usage and activations. The MCR-101-A manifold contains two electronically activated solenoids used to supply hot, cold, and mixed water to a single plumbing fixture. The manifold contains 1/2" pipe copper solder unions at water inlets and a soft nose union between solenoids. The MCR-101-A solenoid operating voltage is 24 VAC – 50/60 Hz. The unit includes 15’ cable w/ 6 position, 4 pin RJ-11 connector to connect to Sloan PWT MCR-Series Controllers. The MCR-101-A is a high-quality and durable copper body mixing manifold designed for use with large commercial facilities looking to manage water usage and activations with the Sloan PWT Systems.
Features
PWT Single Line Mixing Manifold
- Manifold containing two electronically activated solenoids used to supply hot, cold and mixed water to a lavatory fixture
- 1/2 Inch Pipe Copper Solder Unions at water inlets
- Soft Nose Union between solenoids
- Two 3/8 NPT to 3/8 Tube
- One 0.5 gpm Flow Orifice
- One 3/8 NPT to 3/8 NPT Coupling
- 10 feet 3/8 OD Nylon Tubing
- 24 VAC – 50/60 Hz Solenoid Operating Voltage, 12 VA (500mA) In Rush; Holding 4.63 VA (193 mA), 7W Consumption
- Brass body with integral ‘Y’ strainer (80 Mesh)
- Stainless Steel Valve Seat
- Includes 15’ cable w/ 6 position, 4 pin RJ-11 connector to connect to Sloan MCR-Series Controller
- Solenoid cable length can be increased to a maximum overall length of 200 feet with additional PWT extension cord kits
- 160 Fahrenheit Maximum water temperature
- ETF-1003-36 3’ single wire extension cord kit
- ETF-1003-108 9’ single wire extension cord kit
- ETF-1003-240 20’ Single wire extension cord kit
- ETF-1003-600 50’ single wire extension cord kit
