The Sloan MCR-176 Infrared Sensor Shower System is used with the Sloan PWT System to manage water usage and activations. The MCR-176 Shower System is used to control a single pre-mixed or tempered water line and operates on a 24 VAC transformer. The MCR-176 uses an infrared sensor for activation and both the run-time and sensing range are adjustable. The Shower System includes the following components: EL-462-A Infrared Sensor Module, ETF-492-A Controller, MCR-139-A Solenoid, EL-154 120VAC / 24 VAC Transformer, and ETF-458-A 20' Power Cord Kit. The MCR-176 Infrared Sensor Shower System is perfect for both public or private shower's where the facility is looking to manage run-times and water usage to prevent misuse and promote water conservation.
Features
- System includes five components: ETF-492-A EL-154, MCR-139-A, ETF-458-A and EL-462-A
- Infrared, sensor-activated shower control for single, pre-mixed shower
- Water run-times and sensor range are adjustable
- Control module may be located remotely as far as 35 feet from sensor using additional PWT extension cord kits
- Waterproof, NEMA 6-compliant sensor module
- Diagnostic LED indicators in control module
- May be paired with Sloan Act-O-Matic Standard or Institutional style showerheads
- Accessories:
ETF-1003-72 6’ Single Wire Extension Cord Kit (order separately)
- ETF-1003-108 9’ Single Wire Extension Cord Kit (order separately)
- ETF-1003-240 20’ Single Wire Extension Cord Kit (order separately)
- ETF-1003-600 50’ Single Wire Extension Cord Kit (order separately)
- Visible LED target detection
- Infrared sensor module, controller, solenoid, 120 VAC/24 VAC transformer, 20’ power cord kit and mounting hardware for sensor and controller
- Operates on 24 V AC
- Adjustable sensing range
- Adjustable run time
- 24 VAC brass body solenoid with integral “Y” strainer
- Control module may be located remotely as far as 35’ from sensor using additional MICRO Plumb® extension cord kits
- RJ-11 modular connections from sensor and solenoid to controller
