} Pasar al contenido principal
Your web browser (Internet Explorer 11) is out of date. Update your browser for more security, speed, and the best site experience. Learn how to update your browser

Sloan Publishes Building Commissioning Guide Outlining How to Prepare Commercial Restrooms Prior to Building Re-Opening from COVID-19

Franklin Park, IL —

Mayo 06, 2020

Sloan, the world’s leading manufacturer of commercial plumbing systems, has developed a guide indicating best practices for commercial buildings in order reduce water safety risks as facilities around the country begin to re-open.

There are serious risks associated with prolonged system inactivity. Water that sits in plumbing lines for extended periods of time becomes stagnant, which could lead to elevated levels of lead and copper. This water also has the potential to contain little to no residual disinfectant, leading to elevated levels of bacteria and other microbiological contaminants.

“Facilities should keep water moving through their buildings to minimize problems associated with bacterial contamination,” said Dr. Andrew Whelton, Associate Professor of Civil Engineering and Environmental and Ecological Engineering at Purdue University. “Plumbing fixtures that can be programmed to automatically purge potable plumbing lines can greatly reduce the potential for complications and health risks associated with stagnant water.”

For flushometers, Sloan’s guidelines recommend starting the water-purging process with water closets and urinals located the farthest from the branch lines and flushing the first water closet and/or urinal at least three times. Each subsequent water closet and urinal only needs to be flushed twice. In the case of urinals with ultra-low flush volumes (0.125-0.25 gpf), five to six flushes are required. Pressure-assisted and tank-type toilets should also be flushed a minimum of three times, while allowing a full setup and re-pressurization in between each flush.

Automatic faucets are easily flushed simply by placing a hand underneath the faucet for a minimum of 30 seconds. Faucet sprayheads should be removed after the flushing process to remove debris and sanitized in a bleach solution, if not replaced altogether.

Employee safety throughout the flushing process is critical, as initial flushes of stagnant water have the potential to release chemical and microbiological contaminants. Guidance on worker safety for Legionella control and prevention can be found at osha.gov.

For more information on Sloan’s support throughout the COVID-19 pandemic, visit sloan.com. Follow Sloan on Facebook, Twitter, Instagram, and LinkedIn for additional updates.

Sloan es el principal fabricante mundial de sistemas de plomería comercial y ha estado en operación desde 1906. Con sede en Franklin Park, Illinois, la compañía está a la vanguardia del movimiento de construcción ecológica y brinda soluciones sostenibles para cuartos de baño fabricando productos eficientes en el consumo de agua como válvulas de descarga, llaves electrónicas y sistemas de despachador de jabón, sistemas de lavabos y accesorios de porcelana para aplicaciones comerciales, industriales y mercados institucionales en todo el mundo.

Contactos con Medios de Comunicación

Para obtener más información, contacte a:

Alex Oltmanns
Content Specialist

Alison Heitman
Director Global Marketing Communications

10500 Seymour Avenue
Franklin Park, IL 60131